SOME of the available upgrades from AES
are as follows:
1)
Change the L/D of the extruder to longer or shorter as the
process requires
2) Add barrel vent port(s)
3) Change from water cooling to air
cooling or visa versa as the process requires
AES can perform a complete PM
inspection of your extrusion complex, checking all components
and compiling an extensive checklist report. This report will
highlight all the items that have to be maintained, re-furbished
or replace.
AES also provides extruder feed screw
and electronic barrel ID measuring services.
We also can provide equipment
evaluation in your plant or ours.
We will supervise and/or assist in the
installation of all extruder and extruder related equipment,
both mechanically and electrically. This will insure a smooth
and trouble free start-up of your extrusion system.
All extruders from 3.5" in diameter and
above should be borescoped in place to insure proper alignment
of all components.
